Concrete polishing is a relatively new & innovative eco-friendly flooring option. It uses a bare concrete slab, typically the building’s foundation, and turns it into to a decorative floor. The finished product looks similar to a polished stone such as marble or travertine. All products added to the concrete during the polishing process are intended to enhance the natural concrete, not cover or alter it. The end has all the natural perks of the original concrete slab, only it’s stronger and more resistant to staining.
The Process of Polishing Concrete
The concrete polishing process is similar to sanding wood, but on a much larger scale. The initial grinding stages remove any dirt or coatings from the floor, and remove the surface paste to expose the stronger concrete that lies beneath. The next grinding stages of finer grits refine the rough floor to a flat, level surface to ensure a consistent polish. And finally the higher grit resin polishing diamonds are used to progressively bring the floor to a durable, high-gloss (or low-gloss if you prefer) finish. A densifier, which boosts the strength and abrasion resistance, and a penetrating sealer, which acts as a stain inhibitor, are applied to the flooring at various stages throughout the concrete polishing process.